You can see the awful, misaligned panel gaps in those photos.
You can see the awful, misaligned panel gaps in those photos.
It wasn’t a suggestion at all.
I was just saying that we, the consumer are going to end up paying for it somehow or another.
Like they’re going to just take the lack of those fee profits off the bottom line. Look forward to the new and/or increased yearly fees now.
Nice find!
I’d be curious to see RTINGS do a review of the panel on it.
I thought I was 43 for probably close to a year, and even told everyone that asked I was until I had to get my own health insurance and found out I was actually 44.
Except if you care about anything having to do with picture quality, brightness, contrast ratio or features such as HDR etc, then it’s going to be a really shitty TV. They’re made for the menus at McDonald’s, not a device for modern media.
If you disable the Ethernet/WiFI then you can create a local account, but you have to do a small.extra step…
press SHIFT+F10 keys to open Command Prompt.
Run the following: OOBE\BYPASSNRO
After this, setup will reboot the computer and you’ll get a new option I don’t have Internet or Continue with limited setup to skip the Internet requirement and you can create a local account as well.
Just can’t win around here.
Lol, what? There is no malware in classic shell, or start11 or explorer patcher. Wtf are you talking about?
Could they not have just kicked it over instead of bringing a giant ass excavator?
This is only the 3764th post this week…
Except you still pay for Prime so it doesn’t really matter if your delete the app…
The iPhone is not anywhere close to being able to play any AAA titles at 4k with raytracing, what are you smoking? Cause I want some… just cause it’s running at a 4k res with some sort of “raytracing” activated does not equate to anything near what the lame ass consoles can do, much less a PC with a decent GPU. It’s just not the same when it comes down to the rendered frames being compared.
A mobile port is just not even in the same ball park.
I still use Feedly daily!
I use it when I need it to speed up python scripting for CG applications, but I don’t need it on a constant basis. It could be weeks or more between when I’ll dig into it.
yeah, I’ve done my best to remove it all and have it in a pretty good spot at this point.
My windows install is from 2009 when windows 7 was released and hasn’t been fresh installed since. Hardware has changed 5 times since then and it’s still running like day one.
Haha, I actually am and run Linux on my main machine and other machines in the house, I explained in my other post why I need windows.
I’m a CG artist and I dual boot Fedora on my workstation and run it on my file/license server. I’m very familiar with Linux and it’s great for a lot of things.
A ton of my software runs much better than on windows and I would stay in it if I could, but unfortunately I have software needs that don’t run on Linux and can’t work in a VM in full capacity.
I’d pay extra for a windows that has nothing except the settings, task manager and the file explorer.
I’ve generally had good luck with hardware and things just worked under linux. But one day I upgraded a few machines on my network to 2.5G ethernet. Several already had the ports, but my little NUC NAS box didn’t, so I installed a 2.5G usb ethernet dongle. No matter what I did, I couldn’t get it to work. It would show up and NM would act like it was up and there were no errors or anything, but it just wouldn’t actually function.
Eventually, I found out that it has a built in USB data partition that contains the drivers for windows. The card was coming up as a usb disk first when the hardware was assigned and not a network card which it should have been.
I had to write a blacklist the usb modules first, which I had done before, but I had to also write a udev rule to automatically add the network card and driver on boot. It wasn’t that difficult to actually do, but I had just never had to do anything with udev rules before. Took me a good three days of troubleshooting to finally get everything to work correctly on boot.
ACTION=="add", ATTRS{idVendor}=="20f4", ATTRS{idProduct}=="e02c", RUN+="/sbin/modprobe r8152" RUN+="/bin/sh -c 'echo 20f4 e02c > /sys/bus/usb/drivers/r8152/new_id'"